Toll Free: 859-543-8524    Request A Quote

Vacuum Tubing Fittings for your Industrial Central Vacuum Piping System.

Tube and Fittings, Pipe and fittings for Industrial Central Vacuums and Pneumatic Conveying systems

Tube and fittings and pipe. Size 1.5″Ø to 14″Ø.
suction, triple filtration, and
Call 859-543-8524 to order by phone. Large stock.
Tube and fittings

Tube and fittings for conveying networks. Tube and fittings for vacuum systems. They may be specified as either tubing(tube) (light wall, O.D.), or as piping (heavy wall, I.D.) depending on the application.

Tube or tubing as it is sometimes called, is generally installed in light wall for multi operator vacuum systems. Loading systems are usually installed with piping, but abrasive products will certainly require a heavy wall network.

Tube and Fittings available in carbon steel, painted steel, galvanized steel, aluminum, and stainless steel

Vacuum Tubing Fittings available in galvanized, stainless, carbon steel and aluminum.


Central Vacuum Pipe


Piping ( I.D.) Schedule 10, 40 and 80 Tubing (O.D.) from 16 Ga. to 11 Ga.

Tubing Light Wall to 14″Ø

Available in:
Carbon Steel, Galvanized Steel,
Aluminum 6061, 304 SS

Straight Ends only on all sizes
Standard tubing length 20 ft. Special cut shorter lengths available for small extra
cutting charge.

Tubing is commonly referred to according to its Outside Diameter (O.D.)



Know More  Request a quote

Long Radius Bends


Bends custom bent in many radius dimensions
in both pipe and tubing

Long Radius Tubing Bends

Custom bends in tubing sizes
available in the Center Line Radius
(CLR) sizes shown below.

Sizes 1-1/2″Ø to 6″Ø. Straight ends only.

To order, please specify O.D.,
material, wall thickness, CLR, and
degree of angle.

Standard tangents C are 2x O.D. (5″
minimum). Custom tangents available.

16 Ga. is 0.065 wall, 11 Ga. is 0.120 wall



Know More  Request a quote

Standard Elbows


Short radius bends in light wall only
Available in “expanded end” and “plain end”

Short Radius 45 Elbows

Available in:
Carbon Steel, Galvanized Steel, Aluminum 6061,
304 SS

Expanded ends standard through 6″Ø.
Straight Ends available on all sizes.

D 1-1/4 thru 4″Ø, 1-1/2″ for 5″Ø & 6″Ø
E Inside Diameter (I.D.) = A
CLR
 Center Line Radius

All dimensions are in inches



Know More  Request a quote

TYs & YLs


TY’s and Y’s available in light wall only
Laterals (Utility Y’s) light wall and heavy wall

45 Degree YLs Thin Wall

Available in:
Carbon Steel, Galvanized Steel, Aluminum 6061, 304 SS

Expanded ends standard through 6″.
Straight Ends available on all sizes.

D 1-1/4″ thru 4″Ø, 1-1/2″ 5″Ø & 6″Ø
E Inside Diameter (I.D.) = A
G Inside Diameter (I.D.) = F
L
 1-1/4″ thru 4″, 1-1/2″ 5″ & 6″

All dimensions are in inches

2-1/8″Ø to 4″Ø – 16 Ga. material
5″Ø to 8″Ø – 14 Ga. material
10″Ø to 14″Ø – 12 Ga. material



Know More  Request a quote

Pipe Adapters


Inlet Valves, Adapters, Reducers, and Cleanouts
Available in light wall and Heavy Wall

Industrial Inlet Valves up to 6″Ø

MNPT = Male National Pipe Thread

1 1/2″ and 2″ valves are die cast zinc with plated
spring loaded cover.

2 1/2″ to 6″ valves features a Sch. 40 body,
machined inside, with 11 Ga. spring loaded steel
plate, painted.  Valves have a large palm plate to
assist opening under high vacuum.



Know More  Request a quote

Pipe Couplings


Slip Couplings and shrink sleeves for light wall
Compression couplings for heavy wall systems

Compression Couplings Morris Type

Bolted couplings are available in both
heavy wall pipe size and tube size up to
24″Ø.

Installation requires only a 3/4″ wrench or
deep socket.  Allows fast cleanout and bend
replacements.  Completely reusable.

Models available in 3, 4, 5, and 6+ bolt
configurations to safely accommodate
heavy wall installations. 

Galvanized with plated hardware, or all
stainless.  Various gasket types available
depending on application.



Know More  Request a quote