Vacuum Hose for all Industrial Vacuum Systems.

Vacuum hose
G-VAC

G-Vac is PVC vacuum hose, it is hose without static grounding and so it is suitable for only a small number of commercial type applications.

» »  »  »

Pros: Very inexpensive Very flexible Good durability Smooth exterior so it pulls easily around equipment

»   »

Cons: Not static conducting Available in 50 ft lengths max.

Diameter: 1.25"Ø, 1.5"Ø, and 2.0"Ø
Lengths cut to order
Cuffs extra

Vacuum hose
B-FLEX  

B-Flex is tremendous. Suitable for many light industrial applications where static conductivity is not a problem. Unlike G-Vac, this hose works with many applications without "adding" static.  It is a clear PVC hose with a white external helix.

»  »  »  »  »

Pros: Inexpensive  Very flexible Food grade Smooth interior Good durability, though not as good as G-Vac

»

Cons: Not static conducting, but much better than G-Vac.

Diameter: 1.5"Ø, 2.0"Ø, 2.5"Ø, and 3.0"Ø
Lengths cut to order, 100 ft. maximum
Cuffs not available

Urevac-2

Urevac-2 is a popular choice, but it's generally used for larger sizes, because it is durable for its weight and flexible. 0.125" of urethane tubing supported with a PVC helix makes this the best choice for wood chips, grains, and other materials for which Type 1100 is suitable, but too heavy.

» »

Pros: Smooth interior Very flexible, lightweight, and durable

» » » » »

Cons: Expensive Not suitable for sharp metal chips Not static conducting 13" Hg. vacuum limit Pronounced exterior helix makes pulling  around corners a chore

Diameter: 1.5"Ø to 4.0"Ø 
60 ft lengths only
Low temperature flexible

Type 1100

Type 1100 (static dissipating) is our most popular choice. Very tough and durable, it is still quite flexible, but the 2" size may not be suitable for sustained hand work in tight places. 

Though this is an industrial duty hose, and is not heavy, some women may find that the 2" hose is too cumbersome for them. Men will have no trouble with 3", though the 4" size is getting pretty heavy. 

This is a PVC - rubber blended hose that relies on its high carbon content to dissipate static, so it is good for most applications where static is a problem with PVC hose, but not all.

Diameter: 1.25"Ø to 8.0"Ø 
Lengths cut to order, 100 ft. maximum
Suitable for full vac

Picture not 
available

It is a clear PVC hose with white external helix and an embedded braided copper wire.

Diameter: 1.5"Ø, 2.0"Ø, 2.5"Ø, and 3.0"Ø
Lengths cut to order, 100 ft. maximum
Cuffs not available

Type 4050

Type 4050 is static conducting with static dissipating cuffs, so it works with most (but not all) static producing materials. It is the most flexible, lowest weight of the static conducting hoses, but at the cost of moderate durability. It is clear PVC with white external helix.

» » » »

Pros Cheap Lightweight Super-flexible Static conducting

» »

Cons Moderately durable (good for clean-rooms and pharmaceutical de-dusting) Can not be cut to non-standard lengths

Diameter: 1.5"Ø and 2.0"Ø only
Lengths: 10 ft, 15 ft, 25 ft, 50 ft only